Robur International
LV EN RU

Koordinātu caurumsišanas štances
Technology Italiana TP Alpha

Vērtējums prece
4
/5
Produktivitāte
4
/5
Tehnoloģiskā elastība
5
/5
Cena (budžets)
3
/5
Investīciju potenciāls
Nosūtīt pieprasījumu
Mēs nosūtīsim jums savu komerciālo piedāvājumu
Apraksts
Reliable punching press with an affordable price. The evolution of the Tecnumerik model. Advanced CNC functions and the rotating head allow orientation of any type of tool with the possibility of using multi-tools, drag tools for cutting, ribs and off-set, and threader.
Konstrukcijas īpatnības
Specifikācija (1)

Not just a punching machine

Technology Italiana TP Alpha isn't limited to punching, and its functions include:

  • Punching.
  • Embossing.
  • Fine contouring.
  • Nibbling.
  • Deburring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coining.

Servo-electric punching unit

The punching unit is powered by a brushless servo-electric FANUC motor managed by CNC.

  • This system lowers energy consumption, enhances productivity, reduces maintenance and grants greater control of accelerations.
  • The DualCam system enables high-frequency machining while avoiding overheating problems.
  • SoftPunch for noise reduction during high-frequency punching or thick/hard material processing.
  • Tool stroke, speed, acceleration and penetration are fully programmable.
  • Complete absence of hydraulic oil.

TRUMPF-style tools

TRUMPF-style tools are the best punching technology of today, offering significant advantages over the AMADA-style tooling technology (turret). These tools are:*

  • 63% shorter.
  • 73% lighter.
  • 69% more affordable.

 

*compared to AMADA-style tools.

Quick setup in 12 seconds

For a single-punch the tool change speed is essential. That's why TP Alpha is equipped with SPEEDY Setup—the fastest and simplest tool setup system on the market. With SPEEDY Setup, it only takes 12 seconds to set up the tool on the machine.

Full auto-index

The auto-index system is fully integrated inside the punching unit and managed by the CNC, allowing the orientation of any type of tool—single or multi-tool—from 0° to 360° with a minimal programmable step of 0.01°. Auto-index benefits include:

  • Simple programming, even for complex nesting.
  • Lowered machine setup costs.
  • More efficient use of material.

Automatic repositioning

The punch press can process extra-large sheet formats by repositioning the sheets along the X-axis with the machine head. The number of repositions is potentially infinite in both positive and negative directions.

“C” frame

The "C" frame makes the machine accessible on three sides, allowing both front and side loading. It also enables the use of non-standard sheet metal sizes thanks to the repositioning and overturning capabilities. The monolithic electro-welded structure was subjected to a normalization heat treatment, spreading all the structure tensions generated by welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Automatic repositioning

The punch press can process extra-large sheet formats by repositioning the sheets along the X-axis with the machine head. The number of repositions is potentially infinite in both positive and negative directions.

Large 18,5 "touch-screen

Simplified input operations thanks to the touch screen monitor combined with a personalized HMI interface.

CNC software

  • HMI TECNOCONTROL: touch screen interface by TECHNOLOGY that simplifies the punch press use. Dedicated pages for individual functions and a description of commands that don’t require programming.
  • TECNOCAM software: swift and visual approach to creating processing programs without the use of ISO codes.

Other TP Alpha features

  • X-Y axes moving system implemented through two distinct technologies: X-axis with rack and pinion and Y-axis with ball screw guarantee the maximum sheet stability and processing precision.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two sheet metal support table options: with metal balls or brushes.
  • Sheet locking clamps with a pneumatic system, collision prevention sensor and automatic positioning option.
  • Electropump lubrication system for threading tools/rodents and automatic lubrication system for the working area.
  • Scrap suction device.
  • Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • Reclining front surface with manual or automatic actuation and pneumatic locking.
  • CAD / CAM Jetcam Expert software to enhance the capabilities of a punch press.
  • Tele-assistance for remote machine servicing.
  • Safety photocells according to CE standards to create a safety zone around the machine.
 
Specifikācija Alpha 256
Y ass, mm 1250
X ass, mm 1500
Automatiska repozicionesana uz X ass, mm 3000
Maksimalais preses spidiens, ton 25
Maksimalais materiala biezums, mm 6,5
Maksimalais loksnes svars, kg 150
Maksimalais sitienu skaits minute, sit./min 600
Instrumenta nomainas laiks (operators), sek 12
Atkartosanas precizitate, mm ± 0,05
Autoindex rotaciju atrums, apgr./min 50
Videjais energijas paterins, kW 8
Darba galda izmeri, mm 4700x3200x2300
Aptuvenais svars, kg 8000
 
Konstrukcijas īpatnības

Not just a punching machine

Technology Italiana TP Alpha isn't limited to punching, and its functions include:

  • Punching.
  • Embossing.
  • Fine contouring.
  • Nibbling.
  • Deburring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coining.

Servo-electric punching unit

The punching unit is powered by a brushless servo-electric FANUC motor managed by CNC.

  • This system lowers energy consumption, enhances productivity, reduces maintenance and grants greater control of accelerations.
  • The DualCam system enables high-frequency machining while avoiding overheating problems.
  • SoftPunch for noise reduction during high-frequency punching or thick/hard material processing.
  • Tool stroke, speed, acceleration and penetration are fully programmable.
  • Complete absence of hydraulic oil.

TRUMPF-style tools

TRUMPF-style tools are the best punching technology of today, offering significant advantages over the AMADA-style tooling technology (turret). These tools are:*

  • 63% shorter.
  • 73% lighter.
  • 69% more affordable.

 

*compared to AMADA-style tools.

Quick setup in 12 seconds

For a single-punch the tool change speed is essential. That's why TP Alpha is equipped with SPEEDY Setup—the fastest and simplest tool setup system on the market. With SPEEDY Setup, it only takes 12 seconds to set up the tool on the machine.

Full auto-index

The auto-index system is fully integrated inside the punching unit and managed by the CNC, allowing the orientation of any type of tool—single or multi-tool—from 0° to 360° with a minimal programmable step of 0.01°. Auto-index benefits include:

  • Simple programming, even for complex nesting.
  • Lowered machine setup costs.
  • More efficient use of material.

Automatic repositioning

The punch press can process extra-large sheet formats by repositioning the sheets along the X-axis with the machine head. The number of repositions is potentially infinite in both positive and negative directions.

“C” frame

The "C" frame makes the machine accessible on three sides, allowing both front and side loading. It also enables the use of non-standard sheet metal sizes thanks to the repositioning and overturning capabilities. The monolithic electro-welded structure was subjected to a normalization heat treatment, spreading all the structure tensions generated by welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Automatic repositioning

The punch press can process extra-large sheet formats by repositioning the sheets along the X-axis with the machine head. The number of repositions is potentially infinite in both positive and negative directions.

Large 18,5 "touch-screen

Simplified input operations thanks to the touch screen monitor combined with a personalized HMI interface.

CNC software

  • HMI TECNOCONTROL: touch screen interface by TECHNOLOGY that simplifies the punch press use. Dedicated pages for individual functions and a description of commands that don’t require programming.
  • TECNOCAM software: swift and visual approach to creating processing programs without the use of ISO codes.

Other TP Alpha features

  • X-Y axes moving system implemented through two distinct technologies: X-axis with rack and pinion and Y-axis with ball screw guarantee the maximum sheet stability and processing precision.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two sheet metal support table options: with metal balls or brushes.
  • Sheet locking clamps with a pneumatic system, collision prevention sensor and automatic positioning option.
  • Electropump lubrication system for threading tools/rodents and automatic lubrication system for the working area.
  • Scrap suction device.
  • Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • Reclining front surface with manual or automatic actuation and pneumatic locking.
  • CAD / CAM Jetcam Expert software to enhance the capabilities of a punch press.
  • Tele-assistance for remote machine servicing.
  • Safety photocells according to CE standards to create a safety zone around the machine.
Rādīt vairāk 9
Specifikācija
Informācija ir pieejama
pilnīgākā versijā
Modeļu rinda
Modeļu rinda Y ass, mm Automatiska repozicionesana uz X ass, mm Maksimalais preses spidiens, ton
Alpha 256 1250 3000 25
Modeļu rinda (1)
Raksti
Kā palielināt lokšņu apstrādes uzņēmuma konkurētspēju,ieviešot programmatūras nodrošinājumu
Konkurētspējas paaugstināšana mūsu izpratnē ir maksimāli kvalitatīvas produkcijas ražošana par minimālo cenu un ātrāk nekā konkurentiem.
Mūsu kritēriji apstrādes darbagalda izvēlei

Mēs jau sen strādājam ar dabgaldiem, kas paredzēti grātes un atskarpju noņemšanai, kā arī metāla detaļu virsmas slīpēšanai un pulēšanai, un bez pārspīlējuma varam teikt, ka esam uzkrājuši šai jomā milzu pieredzi

Ražotājs

TECHNOLOGY Italiana started manufacturing punching machines in 1973. The company kept growing with constant passion for innovation, and has never stopped researching, designing, and creating punching machines for sheet metalworking.

Raksti
Kā palielināt lokšņu apstrādes uzņēmuma konkurētspēju,ieviešot programmatūras nodrošinājumu
Konkurētspējas paaugstināšana mūsu izpratnē ir maksimāli kvalitatīvas produkcijas ražošana par minimālo cenu un ātrāk nekā konkurentiem.
Mūsu kritēriji apstrādes darbagalda izvēlei

Mēs jau sen strādājam ar dabgaldiem, kas paredzēti grātes un atskarpju noņemšanai, kā arī metāla detaļu virsmas slīpēšanai un pulēšanai, un bez pārspīlējuma varam teikt, ka esam uzkrājuši šai jomā milzu pieredzi

Jums ir palikuši neatbildēti jautājumi?
Uzdodiet jautājumu menedžerim

Aizpildot šo veidlapu, jūs brīvprātīgi iesniedzat kompānijai savus personas datus. Jūsu personas dati tiek apstrādāti saskaņā ar Eiropas Parlamenta un Padomes Regulu (ES) 2016/679 (2016. gada 27. aprīlis). Jums jebkurā laikā ir tiesības pieprasīt informāciju par jūsu personas datu izmantošanu, kā arī prasīt dzēst jūsu datus.

scroll arrrow