Robur International
RU EN LV

Koordinātu caurumsišanas štances
Technology Italiana TP Alpha

Vērtējums prece
2
/5
Produktivitāte
2
/5
Tehnoloģiskā elastība
5
/5
Cena (budžets)
4
/5
Investīciju potenciāls
Nosūtīt pieprasījumu
Mēs nosūtīsim jums savu komerciālo piedāvājumu
Apraksts
The ideal punching machine to enter the world of punching, at an affordable price. It is the evolution of Tecnumerik in fact it has the same CNC functions as an automatic machine. The rotating head allow the orientation of any type of tool, as well as the use of multi-tools, drag tools for cutting, ribs, off-set, and tapping tool.
Konstrukcijas īpatnības
Specifikācija (3)

 

“C” frame

Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Servo-Electric punching unit

The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.

  • This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
  • The DualCam system allows high frequency machining avoiding overheating problems.
  • SoftPunch functions for noise reduction working high thickness or hard materials.
  • Stroke, speed, accelaration and penetration of the tool fully programmable.
  • Absence of hydraulic oil fully.

Full Auto-Index

System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:

  • Simple programming even for complex nesting.
  • Lower machine setup costs.
  • Greater efficiency in the use of the material.

TRUMPF Style tools

The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).

  • Lenght: -63%.
  • Weigth: -73%.
  • Price: -69%.

Not only a punching machine

A complete work center.

  • Punching.
  • Emboss.
  • Fine contouring.
  • Nibbling.
  • De-burring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coin.

Quick setup in 12 seconds

The Clever Tool Change System is based on the use of containers with a self-centering system that allows quick engagement of the tool in the machine head. The speed of change remains of fundamental importance especially for those processes that require tools for deformation or large dimensions: tools and / or multi-tools are housed in just 12 seconds, a feature that makes the TECHNOLOGY machines unique in its field.

Automatic repositioning

Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.

Customize the configuration of the turret tool change

The TP Alfa turret punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:

  • Basic - 1 auto-index tools.
  • Medium - 5 auto-index tools.
  • Top - 10 auto-index tools.

Large 15 "touch-screen

The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.

CNC software

  • HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
  • Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.

Other TP Alfa features

  • X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two Sheet metal support tables options - with metal balls or brushes.
  • Sheet locking clamps with pneumatic system.
  • Tool lubrication system.
  • Scrap suction device.
  • Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
  • Tele-assistance.
  • Safety photocells.
  • And others.
 
Specifikācija Alpha 246 Alpha 256 Alpha 266
Y ass, mm 1000 1250 1500
X ass, mm 1500 1500 1500
Automatiska repozicionesana uz X ass, mm 3000 3000 3000
Maksimalais preses spidiens, ton 25 25 25
Maksimalais materiala biezums, mm 6 6 6
Maksimalais loksnes svars, kg 150 150 150
Maksimalais sitienu skaits minute, sit./min 600 600 600
Instrumenta nomainas laiks (operators), sek 12 12 12
Atkartosanas precizitate, mm ± 0,01 ± 0,01 ± 0,01
Autoindex rotaciju atrums, apgr./min 50 50 50
Videjais energijas paterins, kW 5 5 5
Darba galda izmeri, mm 3650х3200х2300h 3900x3200x2300h 4400x3200x2300h
Aptuvenais svars, kg 4800 4900 5500
 
Konstrukcijas īpatnības

 

“C” frame

Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Servo-Electric punching unit

The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.

  • This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
  • The DualCam system allows high frequency machining avoiding overheating problems.
  • SoftPunch functions for noise reduction working high thickness or hard materials.
  • Stroke, speed, accelaration and penetration of the tool fully programmable.
  • Absence of hydraulic oil fully.

Full Auto-Index

System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:

  • Simple programming even for complex nesting.
  • Lower machine setup costs.
  • Greater efficiency in the use of the material.

TRUMPF Style tools

The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).

  • Lenght: -63%.
  • Weigth: -73%.
  • Price: -69%.

Not only a punching machine

A complete work center.

  • Punching.
  • Emboss.
  • Fine contouring.
  • Nibbling.
  • De-burring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coin.

Quick setup in 12 seconds

The Clever Tool Change System is based on the use of containers with a self-centering system that allows quick engagement of the tool in the machine head. The speed of change remains of fundamental importance especially for those processes that require tools for deformation or large dimensions: tools and / or multi-tools are housed in just 12 seconds, a feature that makes the TECHNOLOGY machines unique in its field.

Automatic repositioning

Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.

Customize the configuration of the turret tool change

The TP Alfa turret punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:

  • Basic - 1 auto-index tools.
  • Medium - 5 auto-index tools.
  • Top - 10 auto-index tools.

Large 15 "touch-screen

The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.

CNC software

  • HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
  • Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.

Other TP Alfa features

  • X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two Sheet metal support tables options - with metal balls or brushes.
  • Sheet locking clamps with pneumatic system.
  • Tool lubrication system.
  • Scrap suction device.
  • Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
  • Tele-assistance.
  • Safety photocells.
  • And others.
Rādīt vairāk 9
Specifikācija
Informācija ir pieejama
pilnīgākā versijā
Modeļu rinda
Modeļu rinda Y ass, mm Automatiska repozicionesana uz X ass, mm Maksimalais preses spidiens, ton
Alpha 246 1000 3000 25
Alpha 256 1250 3000 25
Alpha 266 1500 3000 25
Modeļu rinda (3)
Raksti
Kā palielināt lokšņu apstrādes uzņēmuma konkurētspēju,ieviešot programmatūras nodrošinājumu
Konkurētspējas paaugstināšana mūsu izpratnē ir maksimāli kvalitatīvas produkcijas ražošana par minimālo cenu un ātrāk nekā konkurentiem.
Mūsu kritēriji apstrādes darbagalda izvēlei

Mēs jau sen strādājam ar dabgaldiem, kas paredzēti grātes un atskarpju noņemšanai, kā arī metāla detaļu virsmas slīpēšanai un pulēšanai, un bez pārspīlējuma varam teikt, ka esam uzkrājuši šai jomā milzu pieredzi

Ražotājs

TECHNOLOGY Italiana started manufacturing punching machines in 1973. The company kept growing with constant passion for innovation, and has never stopped researching, designing, and creating punching machines for sheet metalworking.

Raksti
Kā palielināt lokšņu apstrādes uzņēmuma konkurētspēju,ieviešot programmatūras nodrošinājumu
Konkurētspējas paaugstināšana mūsu izpratnē ir maksimāli kvalitatīvas produkcijas ražošana par minimālo cenu un ātrāk nekā konkurentiem.
Mūsu kritēriji apstrādes darbagalda izvēlei

Mēs jau sen strādājam ar dabgaldiem, kas paredzēti grātes un atskarpju noņemšanai, kā arī metāla detaļu virsmas slīpēšanai un pulēšanai, un bez pārspīlējuma varam teikt, ka esam uzkrājuši šai jomā milzu pieredzi

Jums ir palikuši neatbildēti jautājumi?
Uzdodiet jautājumu menedžerim

Aizpildot šo veidlapu, jūs brīvprātīgi iesniedzat kompānijai savus personas datus. Jūsu personas dati tiek apstrādāti saskaņā ar Eiropas Parlamenta un Padomes Regulu (ES) 2016/679 (2016. gada 27. aprīlis). Jums jebkurā laikā ir tiesības pieprasīt informāciju par jūsu personas datu izmantošanu, kā arī prasīt dzēst jūsu datus.

scroll arrrow