Koordinātu caurumsišanas štances
Technology Italiana TP Beta
“C” frame
Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.
Servo-Electric punching unit
The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.
- This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
- The DualCam system allows high frequency machining avoiding overheating problems.
- SoftPunch functions for noise reduction working high thickness or hard materials.
- Stroke, speed, accelaration and penetration of the tool fully programmable.
- Absence of hydraulic oil fully.
Full Auto-Index
System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:
- Simple programming even for complex nesting.
- Lower machine setup costs.
- Greater efficiency in the use of the material.
TRUMPF Style tools
The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).
- Lenght: -63%.
- Weigth: -73%.
- Price: -69%.
Not only a punching machine.
A complete work center. The functions of the machine go beyond normal punching:
- Punching.
- Emboss.
- Fine contouring.
- Nibbling.
- De-burring.
- Forming.
- Bending.
- Marking.
- High speed forming.
- Tapping.
- Engraving.
- Coin.
Horizontal tool change system
The Clever Turret Tool Change System revolutionizes the concept of the traditional turret system, making it obsolete and making the workplace more visible and accessible. Is developed horizontally with 5 self-indexing and customizable workstations. Each station can be equipped with single or multi-tool tools. The single tool change is done in 3 seconds, the tool change in Multi-Tools in 0.5 seconds. Stations are set up in only 12 seconds.
Automatic repositioning
Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.
Customize the configuration of the turret tool change
The TP Beta punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:
- Basic - 5 auto-index tools.
- Medium - 9 auto-index tools.
- Top - 18 auto-index tools.
Large 15 "touch-screen
The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.
CNC software
- HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
- Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.
Other TP Beta features
- X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
- The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
- Two Sheet metal support tables options - with metal balls or brushes.
- Sheet locking clamps with pneumatic system.
- Tool lubrication system.
- Scrap suction device.
- Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
- CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
- Tele-assistance.
- Safety photocells.
- And others.
| Specifikācija | Beta 256 | Beta 258 | Beta 266 |
|---|---|---|---|
| Y ass, mm | 1250 | 1250 | 1500 |
| X ass, mm | 1500 | 2000 | 1500 |
| Automatiska repozicionesana uz X ass, mm | 3000 | 4000 | 3000 |
| Maksimalais preses spidiens, ton | 25 | 25 | 25 |
| Maksimalais materiala biezums, mm | 6 | 6 | 6 |
| Maksimalais loksnes svars, kg | 150 | 150 | 150 |
| Maksimalais sitienu skaits minute, sit./min | 750 | 750 | 750 |
| Instrumenta nomainas laiks (operators), sek | 12 | 12 | 12 |
| Atkartosanas precizitate, mm | ± 0,01 | ± 0,01 | ± 0,01 |
| Autoindex rotaciju atrums, apgr./min | 50 | 50 | 50 |
| Videjais energijas paterins, kW | 6 | 6 | 6 |
| Darba galda izmeri, mm | 3900х3200х2300h | 3900х4350х2300h | 4400x3200x2300h |
| Aptuvenais svars, kg | 3500 | 4500 | 5500 |
“C” frame
Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.
Servo-Electric punching unit
The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.
- This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
- The DualCam system allows high frequency machining avoiding overheating problems.
- SoftPunch functions for noise reduction working high thickness or hard materials.
- Stroke, speed, accelaration and penetration of the tool fully programmable.
- Absence of hydraulic oil fully.
Full Auto-Index
System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:
- Simple programming even for complex nesting.
- Lower machine setup costs.
- Greater efficiency in the use of the material.
TRUMPF Style tools
The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).
- Lenght: -63%.
- Weigth: -73%.
- Price: -69%.
Not only a punching machine.
A complete work center. The functions of the machine go beyond normal punching:
- Punching.
- Emboss.
- Fine contouring.
- Nibbling.
- De-burring.
- Forming.
- Bending.
- Marking.
- High speed forming.
- Tapping.
- Engraving.
- Coin.
Horizontal tool change system
The Clever Turret Tool Change System revolutionizes the concept of the traditional turret system, making it obsolete and making the workplace more visible and accessible. Is developed horizontally with 5 self-indexing and customizable workstations. Each station can be equipped with single or multi-tool tools. The single tool change is done in 3 seconds, the tool change in Multi-Tools in 0.5 seconds. Stations are set up in only 12 seconds.
Automatic repositioning
Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.
Customize the configuration of the turret tool change
The TP Beta punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:
- Basic - 5 auto-index tools.
- Medium - 9 auto-index tools.
- Top - 18 auto-index tools.
Large 15 "touch-screen
The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.
CNC software
- HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
- Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.
Other TP Beta features
- X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
- The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
- Two Sheet metal support tables options - with metal balls or brushes.
- Sheet locking clamps with pneumatic system.
- Tool lubrication system.
- Scrap suction device.
- Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
- CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
- Tele-assistance.
- Safety photocells.
- And others.
pilnīgākā versijā
| Modeļu rinda | Y ass, mm | Automatiska repozicionesana uz X ass, mm | Maksimalais preses spidiens, ton |
|---|---|---|---|
| Beta 256 | 1250 | 3000 | 25 |
| Beta 258 | 1250 | 4000 | 25 |
| Beta 266 | 1500 | 3000 | 25 |
TECHNOLOGY Italiana started manufacturing punching machines in 1973. The company kept growing with constant passion for innovation, and has never stopped researching, designing, and creating punching machines for sheet metalworking.
