Robur International
RU EN LV

Koordinātu caurumsišanas štances
Technology Italiana TP Zeta

Vērtējums prece
5
/5
Produktivitāte
5
/5
Tehnoloģiskā elastība
2
/5
Cena (budžets)
5
/5
Investīciju potenciāls
Nosūtīt pieprasījumu
Mēs nosūtīsim jums savu komerciālo piedāvājumu
Apraksts

Suitable for large productions. Ideal for companies looking for punching machines of high technological and performance level. The small size of the vertical turret in the working area allows the processing of corrugated sheets or thicknesses up to 4/6mm. It can be equipped with an automatic loading and unloading system for sheet metal, allowing nonstop machining. One of the key features of TP Zeta is the XL model huge working area, which allow the processing of over-size sheet metal by repositioning, and enable to achieve incomparable results.

Konstrukcijas īpatnības
Specifikācija (4)

“C” frame

Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Servo-Electric punching unit

The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.

  • This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
  • The DualCam system allows high frequency machining avoiding overheating problems.
  • SoftPunch functions for noise reduction working high thickness or hard materials.
  • Stroke, speed, accelaration and penetration of the tool fully programmable.
  • Absence of hydraulic oil fully.

Full Auto-Index

System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:

  • Simple programming even for complex nesting.
  • Lower machine setup costs.
  • Greater efficiency in the use of the material.

TRUMPF Style tools

The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).

  • Lenght: -63%.
  • Weigth: -73%.
  • Price: -69%.

Not only a punching machine

A complete work center. The functions of the machine go beyond normal punching:

  • Punching.
  • Emboss.
  • Fine contouring.
  • Nibbling.
  • De-burring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coin.

Vertical tool change system

The Clever Turret Tool Change System revolutionizes the concept of the traditional turret system making it obsolete and makes the work area more visible and accessible. It is developed vertically with 15 stations all auto-index and customizable. Each station can be equipped with single tools or Multi-tools. The single tool change takes place in 3 seconds, tool change within the Multi-tools in 0.5 seconds. The stations are set up in just 12 seconds.

Automatic repositioning

Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.

Customize the configuration of the turret tool change

The TP Zeta punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:

  • Basic - 15 auto-index tools.
  • Medium - 19 auto-index tools.
  • Top - 28 auto-index tools.

Large 15 "touch-screen

The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.

CNC software

  • HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
  • Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.

Automatic sheet loading and unloading systems

  • TCP Compact - it allows to automate the sheet loading cycle and the unloading of single or micro-spliced pieces and it doesn’t need any programming. Compact solution suitable for small spaces.
  • TCP Plus - in addition to carrying out normal loading and unloading operations, it can be programmed, in an easy and intuitive way, to stack finished pieces on unload pallets and move on to the next processing phase.

Other TP Zeta features

  • X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two Sheet metal support tables options - with metal balls or brushes.
  • Sheet locking clamps with pneumatic system. Clamps with automatic positioning are also available (optional).
  • Tool lubrication system.
  • Scrap suction device.
  • Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
  • Tele-assistance.
  • Safety photocells.
  • And others.
 
Specifikācija Zeta 3510 Zeta 3610 Zeta 3612 Zeta XL 3616
Y ass, mm 1250 1500 1500 1500
X ass, mm 2500 2500 3000 4000
Automatiska repozicionesana uz X ass, mm 5000 5000 6000 8000
Maksimalais preses spidiens, ton 30 30 30 30
Maksimalais materiala biezums, mm 6 6 6 6
Maksimalais loksnes svars, kg 150 150 150 150
Maksimalais sitienu skaits minute, sit./min 900 900 900 500
Instrumenta nomainas laiks (operators), sek 12 12 12 12
Atkartosanas precizitate, mm ± 0,01 ± 0,01 ± 0,01 ± 0,01
Autoindex rotaciju atrums, apgr./min 60 60 60 60
Videjais energijas paterins, kW 8 8 8 8
Darba galda izmeri, mm 4700x5380x2360h 4950x5380x2360h 4950x6200x2360 10950x4950x2360h
Aptuvenais svars, kg 11500 13800 14000 15000
 
Konstrukcijas īpatnības

“C” frame

Makes the machine accessible on three sides, allowing both front and side loading, as well as the use of non-standard sheet metal sizes thanks to the possibility of repositioning and overturning. Consisting of a monolithic electro-welded structure and subjected to a normalization heat treatment that allows to spread all the tensions of the structure generated by the welding. TECHNOLOGY frames are built in Italy with certified Italian materials.

Servo-Electric punching unit

The movement of the punching unit is generated by a FANUC brushless servo-electric motor managed by CNC.

  • This system allows lower consumption, high productivity, control of accelarations combined with reduced maintenance.
  • The DualCam system allows high frequency machining avoiding overheating problems.
  • SoftPunch functions for noise reduction working high thickness or hard materials.
  • Stroke, speed, accelaration and penetration of the tool fully programmable.
  • Absence of hydraulic oil fully.

Full Auto-Index

System totally integrated inside the punching unit and managed by the CNC, allows to orient any type of tool, single or contained in the Multi-tools, from 0° to 360 ° with minimum programmable steps of 0.01°. Benefits are indisputable:

  • Simple programming even for complex nesting.
  • Lower machine setup costs.
  • Greater efficiency in the use of the material.

TRUMPF Style tools

The TRUMPF style tool is today the best technology available for punching tools and offers significant advantages over the old AMADA-style tooling technology (turret).

  • Lenght: -63%.
  • Weigth: -73%.
  • Price: -69%.

Not only a punching machine

A complete work center. The functions of the machine go beyond normal punching:

  • Punching.
  • Emboss.
  • Fine contouring.
  • Nibbling.
  • De-burring.
  • Forming.
  • Bending.
  • Marking.
  • High speed forming.
  • Tapping.
  • Engraving.
  • Coin.

Vertical tool change system

The Clever Turret Tool Change System revolutionizes the concept of the traditional turret system making it obsolete and makes the work area more visible and accessible. It is developed vertically with 15 stations all auto-index and customizable. Each station can be equipped with single tools or Multi-tools. The single tool change takes place in 3 seconds, tool change within the Multi-tools in 0.5 seconds. The stations are set up in just 12 seconds.

Automatic repositioning

Possibility to work extra-large sheet formats using the sheet repositioning system along the X axis using machine head. The number of repositioning is potentially infinite.

Customize the configuration of the turret tool change

The TP Zeta punching machine can be equipped with TRUMPF style tools. You can choose one of the proposed configurations or customize each station with standard, special and / or multi-tool tools all auto-index:

  • Basic - 15 auto-index tools.
  • Medium - 19 auto-index tools.
  • Top - 28 auto-index tools.

Large 15 "touch-screen

The use of the touch-screen monitor linked to a personalized HMI, allows to simplify the input operations.

CNC software

  • HMI TECNOCONTROL: interface created by TECHNOLOGY to be used with the touch-screen that leads to simplify the use of the machine with pages dedicated to the individual functions and a description of the commands that doesn’t require the use of codes.
  • Programming software TECNOCAM: Graphic CAM for creating programs on the machine without having to be aware of the ISO code.

Automatic sheet loading and unloading systems

  • TCP Compact - it allows to automate the sheet loading cycle and the unloading of single or micro-spliced pieces and it doesn’t need any programming. Compact solution suitable for small spaces.
  • TCP Plus - in addition to carrying out normal loading and unloading operations, it can be programmed, in an easy and intuitive way, to stack finished pieces on unload pallets and move on to the next processing phase.

Other TP Zeta features

  • X-Y axes moving system: it’s realized with two different technologies: X axis with rack and pinion and Y axis with ball screw, to guarantee the maximum sheet stability and precision in processing.
  • The axes have the possibility to position themselves in negative up to -40 mm. This allows to make notches that are smaller than the punch geometry, avoiding the replacement of the punch.
  • Two Sheet metal support tables options - with metal balls or brushes.
  • Sheet locking clamps with pneumatic system. Clamps with automatic positioning are also available (optional).
  • Tool lubrication system.
  • Scrap suction device.
  • Programmable punch stroke and Automatic tool sharpening compensation: increases tool life by automatically managing the penetration depth for each individual station.
  • CAD / CAM software Jetcam Expert designed to make simple and intuitive the offline programming of CNC punching machines.
  • Tele-assistance.
  • Safety photocells.
  • And others.
Rādīt vairāk 10
Specifikācija
Informācija ir pieejama
pilnīgākā versijā
Modeļu rinda
Modeļu rinda Y ass, mm Automatiska repozicionesana uz X ass, mm Maksimalais preses spidiens, ton
Zeta 3510 1250 5000 30
Zeta 3610 1500 5000 30
Zeta 3612 1500 6000 30
Zeta XL 3616 1500 8000 30
Modeļu rinda (4)
Ražotājs

TECHNOLOGY Italiana started manufacturing punching machines in 1973. The company kept growing with constant passion for innovation, and has never stopped researching, designing, and creating punching machines for sheet metalworking.

Jums ir palikuši neatbildēti jautājumi?
Uzdodiet jautājumu menedžerim

Aizpildot šo veidlapu, jūs brīvprātīgi iesniedzat kompānijai savus personas datus. Jūsu personas dati tiek apstrādāti saskaņā ar Eiropas Parlamenta un Padomes Regulu (ES) 2016/679 (2016. gada 27. aprīlis). Jums jebkurā laikā ir tiesības pieprasīt informāciju par jūsu personas datu izmantošanu, kā arī prasīt dzēst jūsu datus.

scroll arrrow